Photo prints
Sorting, cleaning and scanning loose prints on our two scanners: the Epson FastFoto FF-680W for fast batches and the Epson ET-2750 flatbed for everything fragile.
๐งฐ What you'll need
Every tool and supply named in this unit. Dotted-underlined words in the text jump back here. Buttons open that store's search for the exact product. Prices are rough ranges in Canadian dollars.
Nitrile gloves, powder-free under $25
What it is: Thin disposable rubber-like gloves. They keep skin oil off film and glossy photos and still let you grip.
Our pick: Any powder-free nitrile exam gloves, in your size (S, M, L). Not latex, not vinyl.
In a store: Pharmacy, Costco, hardware store
Rocket blower under $25
What it is: A rubber bulb you squeeze. It puffs clean dry air to push dust off without touching.
Our pick: Giottos Rocket Air Blaster, large
In a store: Camera store
Anti-static brush $25 to $100
What it is: A very soft brush whose fibres remove static, so dust lets go of film and prints.
Our pick: Kinetronics StaticWisk, 2 inch or 4 inch
In a store: Camera store
Microfiber cloths under $25
What it is: Soft woven cloths that lift dust and smears without scratching glass.
Our pick: MagicFiber microfiber cleaning cloths, pack of 6 or more. Wash with no fabric softener.
In a store: Dollar store, optical shop, hardware store
Soft pencil (2B) under $25
What it is: A soft graphite pencil. It is the only thing we ever write with near originals, because it does not bleed and can be removed.
Our pick: Staedtler Mars Lumograph 2B
In a store: Staples, Michaels, dollar store
FastFoto carrier sheet $25 to $100
What it is: A clear plastic folder that came in the FastFoto box. A fragile, torn or tiny photo goes inside it and the whole sheet is fed through the scanner.
Our pick: The Epson carrier sheet supplied with the FF-680W. Replacements are sold by Epson.
In a store: Epson Canada store
Polyester (Mylar) sleeves $25 to $100
What it is: A crystal-clear, chemically safe plastic pocket, open on two sides. A tacky or flaking photo goes inside so it can be scanned and stored without touching anything.
Our pick: Archival polyester L-sleeves (sold as Mylar or Melinex), 5x7 and 8.5x11 inch
In a store: Carr McLean
Small flashlight under $25
What it is: A small bright light. Held low across scanner glass or a disc, it shows dust and scratches.
Our pick: Any pocket LED flashlight
In a store: Hardware store, dollar store
Client and job drives $100 to $500
What it is: External drives. The job drive holds work in progress. The client drive is what we hand over, formatted exFAT.
Our pick: Samsung T7 portable SSD or WD Elements portable drive
In a store: Staples, Costco
Which scanner for which photo
First decision for every print: FastFoto or flatbed?
| Send to the FastFoto FF-680W (sheet-fed) | Send to the ET-2750 flatbed |
|---|---|
| Modern prints in good condition, 1960s onward | Anything older than about 1950 |
| Flat, not curled | Curled, creased, torn, peeling or cracked |
| 2 x 2 inch up to 8.5 inch wide | Smaller than 2 x 2 inch or wider than 8.5 inch |
| Clean backs, no glue or tape | Sticky back, tape, album paper stuck on, any residue (many sticky backs: Unit 7 volume method) |
| Standard thickness | Mounted on card, cabinet cards, tintypes, anything rigid |
| One client batch of similar sizes | Photos with writing in soft pencil or chalk on the front |
| Hand-coloured photos, photos with flaking surface | |
| Any photo the client called "the important one" |
Prepare the prints
- 1Gloves on for glossy prints
Clean dry hands are acceptable for matte prints. Hold edges only.
- 2Keep the order
Work through the stack front to back. Use dividers marked A, B, C between groups.
- 3Remove from sleeves and envelopes
Copy any writing on the envelope onto the job sheet.
- 4Check the back
Writing? It will be scanned too. Sticky? Flatbed pile.
- 5Dust
Rocket blower first. Then one light pass with the soft brush, centre outward.
- 6Sort by size
Within each group, keep same-size prints together. The FastFoto feeds best that way.
- 7Turn every print the same way
Landscape, top edge leading, picture side up for the FastFoto.
โ Do
- Blow, then brush
- Leave fingerprints, stains and marks that do not come off with a blower. We fix them digitally.
โ Do not
- Rub a print with a cloth
- Use water, glass cleaner, alcohol or an eraser on any print
- Flatten a curled print by bending it backward
Epson FastFoto FF-680W: set-up
The FF-680W pulls prints past two sensors, so it scans the front and the back in one pass, about one print per second at 300 ppi.
- 1Turn it on and open the input tray
Pull out the tray extension and the output tray extension. Raise the stopper.
- 2Open the Epson FastFoto app on the iMac
Wait until it shows the scanner as connected.
- 3Open Settings (the gear icon)
Check each tab against the cheat sheet below. Settings can change if someone else used it.
- 4Clean check
Open the scanner cover with the lever. Look at the two glass strips and the rollers. Any dust or smear: clean it (see Cleaning, below).
- Resolution
- 600 dpi
- File type
- TIFF for masters
- Scan back of photo
- Auto detect (scans backs that have writing)
- Enhancements
- ON, and "save both original and enhanced"
- Auto rotate
- ON
- Reduce lines and streaks
- OFF unless a supervisor says
- Curled photo correction
- OFF for flat prints
- File name
- Job number prefix, see Unit 4
- Save to
- Job folder / 1_MASTERS / PH
_a marks the enhanced file and _b marks the back.FastFoto: scanning a batch
- 1Click Start Scanning
A box asks you to describe the photos: year, month or season, subject. Fill it from the job sheet. This becomes the file name and folder.
- 2Square the stack
Maximum 36 standard prints. Fewer if they are thick: about 30. 8 x 10 prints: 10 at a time.
- 3Load the stack
Picture side up, landscape, top edge going in first, centred in the tray.
- 4Slide the stack in until it meets resistance
Do not push past that point.
- 5Close the edge guides
They touch the stack lightly. Not squeezing.
- 6Mixed sizes
Largest at the back, smallest at the front, all centred.
- 7Click Start
Keep your hand near the stack. Watch the first three prints come out.
- 8Collect from the output tray in order
Put them face down on the "done" pile so the order is kept.
- 9Check the screen
Count the thumbnails. The count must equal the number of prints you loaded.
FastFoto: special cases
| Item | How to load it |
|---|---|
| Polaroid or instant print | One at a time. In Settings, Scan Settings, choose the Polaroid photo type. |
| Panorama longer than 12 inches | One at a time. Support the tail with your hand as it feeds. Choose the panoramic photo type. |
| Fragile, torn, tiny (under 2 x 2 in), odd-shaped | Inside the carrier sheet: picture side up, top edge toward the arrow. Load the sheet arrow first. One at a time. |
| Portrait-shaped prints | Still load landscape. Rotate after scanning. |
| Postcards with writing | Normal feed. Check that the back was captured. |
| If you see or hear | Likely cause | Do this |
|---|---|---|
| Vertical line or streak on every scan | Dust or glue on a glass strip | Stop. Clean both glass strips. Rescan every print since the line began. |
| Two prints fed together | Prints stuck together or static | Fan the stack. Reload. Rescan both. |
| Crooked (skewed) scan | Guides too loose or stack not centred | Re-centre, close guides, rescan |
| Print stops halfway | Jam | Do not pull. Open the cover with the lever, lift the print out, check it for damage, tell a supervisor. |
Colours look harsh in the _a file | Auto enhancement overdid it | Keep the original file as master. Redo the enhancement by hand in Unit 17. |
| Back not scanned | Writing too faint for auto detect | Set "scan back" to always for that batch |
| App says scanner not found | Sleep or cable | Wake the scanner, check the USB cable, quit and reopen FastFoto |
FastFoto: cleaning
- 1Turn the scanner off and unplug it
- 2Pull the cover open lever and open the cover
- 3Wipe both glass strips
Dry microfiber cloth. Stubborn spot: a tiny amount of glass cleaner on the cloth, never sprayed into the scanner.
- 4Wipe the rollers
Rotate each by hand and wipe all the way around.
- 5Close until it clicks, plug in, power on
Epson ET-2750 flatbed: what it can and cannot do
| It can | It cannot |
|---|---|
| Scan prints and documents up to 8.5 x 11.7 inches | Scan slides or negatives. It has no light in the lid. |
| 1200 ppi true optical resolution | Focus on anything that is not touching the glass |
| Scan fragile prints with zero movement | Scan through thick frame glass sharply |
| Scan album pages that lie flat | Scan pages bigger than the glass in one pass |
ET-2750: scanning with Epson Scan 2
- 1Clean the glass
Microfiber cloth. Check for dust with a flashlight held low.
- 2Place the print face down
Top of the photo toward the corner arrow. Leave about 5 mm from the glass edges. The very edge of the glass is not scanned.
- 3Several prints at once
Keep at least 20 mm between them so the software can separate them.
- 4Close the lid gently
For a fragile or thick item, lower the lid until it rests. Do not press.
- 5Open Epson Scan 2
Set Mode: Photo Mode.
- 6Set the options
Use the cheat sheet below.
- 7Click Preview
In the Thumbnail tab, each print becomes its own thumbnail. Check that none is cut off. If one is, switch to the Normal tab and draw the box yourself.
- 8Check File Save Settings
TIFF, job prefix, correct folder.
- 9Click Scan
- 10Flip and scan the back
If the back has any writing or stamp. Name it with
_back. - 11Lift prints straight up
Slide a fingernail or a slip of paper under the edge. Never drag a print across the glass.
- Mode
- Photo Mode
- Document Source
- Scanner Glass
- Document Type
- Reflective
- Image Type
- 24-bit Color
- Resolution
- 600 dpi (1200 for prints under 3 in)
- Unsharp Mask
- OFF
- Color Restoration
- OFF for the master
- Dust Removal
- OFF
- Descreening
- ON only for newspaper or magazine pages
- Image Format
- TIFF
| If you see or hear | Likely cause | Do this |
|---|---|---|
| Soft or blurry area | Print not flat on the glass | Lower lid, add a sheet of white paper and a light book on top. Never press on glass by hand. |
| Rainbow rings | Glossy print touching glass tightly (Newton rings) | Lift, blow out dust, reposition |
| Thumbnail cuts off part of the photo | Auto-detect confused by white border or dark photo | Normal tab, draw the marquee by hand |
| Dots or moirรฉ pattern on a printed picture | Halftone print (newspaper, book) | Turn Descreening ON |
| Whole scan has a colour tint | Color Restoration was left on, or wrong Image Type | Reset to the cheat sheet |
After scanning
- 1Count
Files in the folder = prints on the job sheet (+ backs).
- 2Open every 10th file at 100%
Sharp? Complete? No streaks?
- 3Return prints to their envelope or box in order
- 4Copy the session to the job drive
Unit 4.
โถScanning with the FastFoto FF-680W, start to finish๐ Watch for: how the stack is loaded and how the app names the batchOpens on YouTube in a new tab
โถHow to scan old photos like a pro๐ Watch for: flatbed settings and file formatsOpens on YouTube in a new tab
โถEpson scanner settings for prints๐ Watch for: where each setting is in the Epson softwareOpens on YouTube in a new tab
โถBest settings for scanning photos๐ Watch for: what resolution changesOpens on YouTube in a new tab
โถChoosing gloves for handling photos๐ Watch for: glove types on real printsOpens on YouTube in a new tab
โถStorage for fragile prints๐ Watch for: sleeves and supportsOpens on YouTube in a new tab๐ Worksheet 5: Photo prints
Part A: Quick check
Click one answer. Green means correct. Red means try again. You can try as many times as you need.
1. Which way do prints go into the FastFoto FF-680W?
โ Epson's loading rule for photos: face up, landscape, top edge first, centred.
2. A print has sticky album glue on the back. Where is it scanned?
โ Glue coats the FastFoto rollers and glass and streaks every later scan.
3. Every scan now has a thin vertical line in the same place. What do you do?
โ A line means dirt on a glass strip. It is on every scan until cleaned.
4. Why can the ET-2750 not scan slides?
โ Film needs light from behind. The ET-2750 only lights from below.
5. How far apart should several prints be on the flatbed?
โ The software needs a gap to detect each print separately.
6. FastFoto "Enhancements" should be set to:
โ We keep the untouched scan as master and the enhanced copy as a starting point.
7. A curled corner will look blurry on the ET-2750 because:
โ CIS has almost no depth of focus.
8. How many Polaroids go into the FastFoto at once?
โ Instant prints are thick and are fed one at a time.
Part B: Hands-on practice
Do each task with real equipment and practice media. Tick it when you have done it. Your trainer signs when they have watched you do it.
| I did it | Task | Trainer initials |
|---|---|---|
| Sort a mixed practice box into a FastFoto pile and a flatbed pile, and explain each choice. | ||
| Set every FastFoto setting to the cheat sheet from memory, then check against the page. | ||
| Scan a batch of 20 prints on the FastFoto with correct naming and a matching count. | ||
| Scan one fragile print in the FastFoto carrier sheet. | ||
| Clean the FastFoto glass strips and rollers. | ||
| Scan 4 prints at once on the ET-2750 in Photo Mode and get 4 correct separate files. | ||
| Scan the front and back of a postcard and name both files correctly. | ||
| Fix a deliberately skewed batch and a cut-off thumbnail. |
Part C: Write or draw your answer
1. List 5 kinds of print that must never go through the FastFoto without a carrier sheet.
2. Draw the FastFoto input tray with a stack loaded the correct way. Label "top edge" and "picture side".